Details
Genuine TECE Part · TECEprofil Shower Toilet System
TECE Fine Assembly Set for
Universal Shower Toilet Module
The TECE fine assembly set is the dedicated water-connection kit used to plumb a shower toilet into a TECEprofil universal shower toilet module. It routes the concealed water supply from the cistern’s pre-mounted conduit and connection funnel to the shower toilet itself — so the connections disappear neatly behind the ceramic, exactly as a premium “hidden connection” installation should look.
Shower toilets from Geberit AquaClean, TOTO WASHLET, Grohe Sensia, Duravit SensoWash, VitrA V-Care and Roca In-Wash all require an additional concealed water feed beyond a standard WC. This genuine TECE set provides the reinforced hoses and fittings to make that connection correctly, on a TECEprofil module.
It is supplied in three versions to match the three TECEprofil module heights — 820 mm, 980 mm and 1120 mm. Choose the version that matches your module height (see the selector below). The TECEprofil module and cistern are separate items.
Choose Your Version — By Module Height
This set is matched to the height of your TECEprofil shower toilet module. Select the version with the same height as your module.| Module Height | Fine Set Order No. | Matching TECEprofil Shower Toilet Module |
|---|---|---|
| 820 mm | 9880054 | TECEprofil shower toilet module 820 mm (9300080) |
| 980 mm | 9880053 | TECEprofil shower toilet module 980 mm (9300082) |
| 1120 mm | 9880052 | TECEprofil shower toilet module 1120 mm (9300079) |
The clean, concealed way to plumb in a shower toilet
A shower toilet needs more than a standard WC: it requires an additional water connection (and, for electric models, a power feed) routed to the unit. The difficulty has always been that the position of these connections is not standardised between manufacturers, which historically forced installers into special adaptors or time-consuming improvisation. The TECEprofil shower toilet module solves this by concealing the water and power connections behind the ceramic — and this fine assembly set is the dedicated kit that completes the water connection from the module’s pre-mounted conduit and funnel to the shower toilet itself.
What’s in the Set — Scope of Supply
Each version contains the complete set of reinforced hoses and fittings to make the concealed water connection- Reinforced (braided) hose, 3/8″ female thread — long — the main supply hose routed in front of the wall to the connection funnel
- Reinforced (braided) hose with 3/8″ T-piece, male thread — tees the supply to feed the shower toilet
- Screw coupling, 3/8″ male thread — joins the hose connections securely
- 3/8″ plastic adapter for the F 10 fill valve — adapts the connection at the TECE cistern fill valve
- 3/8″ elbow connector — turns the connection neatly within the concealed space
Thread designations: IG = internal/female thread, AG = external/male thread. All connections are 3/8″, the standard shower toilet water-inlet size.
Compatibility — Modules & Shower Toilets
For use with the TECEprofil universal shower toilet module; designed to suit leading shower toilet brands| Module SystemTECEprofil universal shower toilet module with pre-mounted conduit / connection funnel (module sold separately) | TECEprofil |
| Module Heights CoveredA matched version for each TECEprofil module height | 820 / 980 / 1120 mm |
| Connection TypeConcealed water connection — routed behind the ceramic | Hidden / concealed |
| Designed To SuitGeberit AquaClean, TOTO WASHLET, Grohe Sensia, Duravit SensoWash, VitrA V-Care, Roca In-Wash and other leading shower toilets | Major brands |
| Connection ScopeThis set provides the water connection. The electrical connection is made via the module’s separate terminal box | Water connection |
Please note: the TECEprofil shower toilet module is engineered for the universal connection of shower toilets, and its connection funnel allows the water connection to be positioned to suit different models. As TECE advises, connection of a specific shower toilet should be checked against that model’s requirements — if you would like us to confirm suitability for your exact shower toilet, just ask.
Why This Set Matters — In Detail
Unlike a standard WC, a shower toilet needs an additional water supply taken to the unit — and electric models need a power feed too. The long-standing difficulty is that manufacturers position these connections differently, so there was never a single, tidy way to plumb one in. Installers were left improvising, or buying special adaptors model by model.
The TECEprofil shower toilet module standardises this. Its cistern carries a pre-mounted conduit and a generous connection funnel beside the drain bend, allowing the water connection to be positioned to suit the chosen shower toilet — and this fine assembly set is the matched kit that completes that water connection cleanly.
The outcome: the water and power connections sit concealed behind the ceramic, out of sight — the clean, integrated look that buyers expect from a premium shower toilet installation.
The set carries the water supply from the TECE cistern’s fill valve, in front of the wall, to the connection funnel and on to the shower toilet’s own water inlet. It does this with reinforced (braided) hoses rated for the job, plus the T-piece, screw coupling, valve adapter and elbow needed to route and join the connection neatly within the concealed space.
Because it is the genuine TECE part matched to the module, every fitting is the correct size and thread — 3/8″ throughout, the standard shower toilet water-inlet size — so the connection goes together as designed, without improvised adaptors.
- Routes the concealed water feed from cistern to shower toilet
- Reinforced braided hoses with correct 3/8″ threaded fittings
- Includes the F 10 fill-valve adapter, T-piece, coupling and elbow
- Designed to finish behind the ceramic for a hidden connection
TECEprofil shower toilet modules are made in three installation heights — 820 mm, 980 mm and 1120 mm — to suit different walls and actuation positions. The fine assembly set is supplied to match, because the run of hose required differs with the module height.
It is essential to order the version that matches your module: 9880054 for 820 mm, 9880053 for 980 mm, and 9880052 for 1120 mm. If you are retrofitting a shower toilet to an existing TECEprofil module, the module’s height determines which set you need — and we are happy to confirm it from your module order number.
Quick reference: 820 mm → 9880054 | 980 mm → 9880053 | 1120 mm → 9880052.
This is an original TECE accessory, engineered specifically for the TECEprofil shower toilet module. Using the genuine matched set means the hoses, threads and fittings are exactly as the system was designed around — protecting the integrity of the concealed connection and the reliability of the installation.
It also supports one of the TECEprofil system’s best features: future-proofing. A TECEprofil shower toilet module can be installed with a standard WC first and converted to a shower toilet later — at which point this fine assembly set is exactly what completes the upgrade.
How It Fits Into the Installation
The module is installed
A TECEprofil shower toilet module (with its TECE cistern, pre-mounted conduit and connection funnel) is fitted in the pre-wall or solid-wall installation at the chosen height — 820, 980 or 1120 mm.
The water connection is routed
Using this fine assembly set, the reinforced hose carries the water supply from the cistern’s fill valve, in front of the wall, to the connection funnel beside the drain bend — positioned to suit the chosen shower toilet.
The wall is tiled
With the connections set behind the bare-wall protection, the wall is finished and tiled. The water and power connections are now concealed, ready for the ceramic.
The shower toilet is connected
The shower toilet is mounted and its water inlet connected via this set’s 3/8″ fittings; the electrical feed is taken from the module’s separate terminal box. The connections disappear behind the ceramic.
Overview for guidance only. Installation should be carried out by a competent installer, following the instructions supplied with the TECEprofil module, this set, and the chosen shower toilet.
Product Specifications
| Manufacturer | TECE |
| Product | Fine assembly set for universal shower toilet module (TECEprofil) |
| Order Numbers | 9880054 (820 mm) · 9880053 (980 mm) · 9880052 (1120 mm) |
| Function | Concealed water connection of a shower toilet to a TECEprofil shower toilet module |
| Module Heights | 820 mm, 980 mm and 1120 mm (a matched version for each) |
| Connection Size | 3/8″ throughout (standard shower toilet water-inlet thread) |
| Scope of Supply | Reinforced 3/8″ female hose (long); reinforced hose with 3/8″ T-piece (male); 3/8″ male screw coupling; 3/8″ plastic adapter for F 10 fill valve; 3/8″ elbow |
| Designed To Suit | Geberit AquaClean, TOTO WASHLET, Grohe Sensia, Duravit SensoWash, VitrA V-Care, Roca In-Wash and other leading shower toilets (verify model connection positions) |
| Connection Provided | Water connection (electrical connection via the module’s separate terminal box) |
| Module & Cistern | Sold separately (TECEprofil shower toilet module) |
Installer & Specifier Notes
The following notes are intended for installers and specifiers planning a concealed shower toilet installation on a TECEprofil module.
- Match the height. Order the fine set that matches the module height: 9880054 (820 mm), 9880053 (980 mm) or 9880052 (1120 mm). The hose run differs with module height.
- This is the water-connection set. The electrical connection for an electric shower toilet is made separately, via the empty terminal box on the module — not part of this kit.
- Verify the shower toilet’s connection position. The connection funnel allows flexible positioning, but each shower toilet model has its own water (and power) connection requirements; confirm these before first fix.
- Plan at first fix. The water connection is routed and concealed before tiling. As with any hidden-connection installation, the relevant provisions must be in place before the wall is finished.
- Future-proofing. A TECEprofil shower toilet module can be installed with a standard WC and upgraded to a shower toilet later — this set completes that later conversion.
Frequently Asked Questions
It is the genuine TECE kit that completes the concealed water connection when fitting a shower toilet to a TECEprofil universal shower toilet module. It supplies the reinforced 3/8″ hoses and fittings — T-piece, screw coupling, F 10 fill-valve adapter and elbow — needed to route the water feed from the cistern to the shower toilet so that the connections sit hidden behind the ceramic.
Match the set to your TECEprofil module height: choose 9880054 for an 820 mm module, 9880053 for a 980 mm module, or 9880052 for a 1120 mm module. The 1120 mm version is the most common for a standard floor-mounted pre-wall. If you are not certain of your module height, send us its order number and we will confirm the right set.
No. This is the connection set only. The TECEprofil shower toilet module — which includes the TECE concealed cistern, pre-mounted conduit and connection funnel — is a separate item. This fine assembly set is the accessory that connects your shower toilet to that module.
The TECEprofil shower toilet module is designed for the universal connection of shower toilets, and its connection funnel allows the water connection to be positioned to suit different models — including the leading brands above. Because each model has its own connection requirements, TECE advises verifying the specific shower toilet’s connection position beforehand. If you tell us your exact shower toilet, we can help confirm suitability.
No — this set provides the water connection. For an electric shower toilet, the power feed is taken from the separate empty terminal box built into the TECEprofil module. This kit covers the water side of the installation.
All connections in the set are 3/8″ — the standard water-inlet thread size used by shower toilets. The set includes a 3/8″ female reinforced hose (long), a reinforced hose with a 3/8″ male T-piece, a 3/8″ male screw coupling, a 3/8″ plastic adapter for the F 10 fill valve, and a 3/8″ elbow.
Yes — provided the concealed installation is on a TECEprofil shower toilet module. One of the system’s key advantages is that it can be installed with a standard WC and converted to a shower toilet at a later date. When you make that conversion, this fine assembly set (in the height matching your module) is what completes the water connection.
Yes. This is the original TECE fine assembly set, engineered specifically for the TECEprofil shower toilet module. Using the genuine matched set ensures every hose, thread and fitting is correct for the system, protecting the integrity and reliability of the concealed connection.
Concealed shower toilet installation should be carried out by a competent installer, working to the instructions supplied with the TECEprofil module, this set, and the shower toilet. The connections are routed and concealed before tiling, so the work is best planned and completed at first-fix stage by a qualified bathroom installer or plumber.
Additional Information
| Size | No |
|---|---|
| Weight | 50 |
| Delivery time: | 3-6 Days |
| Specifications: | No |
- Be the first to review this product
Write Your Own Review
Related Products
TECE profil wall-mounted toilet module 112cm Slimline 8cm Cistern
Regular Price: £362.80
Special Price £286.00
